HFP Series Active Probes. Engineers often find the need to probe a variety of different devices and test points in their designs. In order to do this, today’s probes need to be versatile, small, and lightweight while maintaining the necessary bandwidth to capture high-speed signals. As probing points get smaller and closer together, LeCroy’s HFP Series of active probes provide the ability to meet all of your difficult probing challenges
Key Features
• Unique Probe Tips
• Convenient Grounding Accessories
• Easy-To-Use
• 1 GHz to 2.5 GHz Probing Solutions
Spec
Bandwidth | 1 GHz |
Input Capacitance | 0.7 pF at 1 GHz |
DC Input Resistance | 100 kΩ |
Input Dynamic Range | ±8 V |
Attenuation | ÷10 |
Attenuation Accuracy | ±1% |
Output Zero | < 4 mV, referred to input |
Offset Accuracy | ±(1% of offset value + 4 mV) |
Cable Length | 1.3 m |
Probe Head Size (L W H) | 61 mm x 7.3 mm x 13.1 mm |
Input Sockets | Signal and ground sockets compatible with 0.635 mm (0.025") square pins, 0.91 mm (0.036") maximum diameter (for round pins) |
Ordering Information
Warranty
• 1 YR
Contents
• HFP1000 Active Probe - 1 GHz, 0.7 pF Active Probe (÷10), Small Form Factor
• Straight Tip x 4
• Sharp Tip x 4
• Square Pin Ground Spring
• Flexible IC Ground
• Bendable Pogo Ground
• Solder-In Ground
• Right-angle Short Single Lead
• Right-angle Long Single Lead
• Clips (0.8 mm) x 2
• Replaceable Cartridge
• Instruction Manual
※ 자세한 사항은 '데이터시트'나 '매뉴얼'을 참조해 주세요.
상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?
상품이 찜 리스트에 담겼습니다.
바로 확인하시겠습니까?