The CP030 was designed with a small form factor for today’s crowded boards. The small jaw can probe currents in tight spaces and still clamp onto conductors up to 5 mm in diameter. Continuous currents of 30 Arms and peak currents of 50 A can be measured by the CP030, which also features a 50 MHz bandwidth.
Spec Comparison
Model | Max Continuous Input Current | Max Peak Current | Bandwidth | Minimum Sensitivity | Coupling | Max Conductor Size (diameter) | Interface |
30A | 50A <10µs | 50 MHZ | 20mA/div | AC/DC/GND | 5mm | Probus, 1MΩ only | |
30A | 50A <10µs | 100 MHZ | 20mA/div | AC/DC/GND | 5mm | Probus, 1MΩ only | |
AP015 | 30A | 50 A < 10s | 50 MHz | 10 mA/div | AC/DC/GND | 5 mm | Probus, 1MΩ only |
150 A | 500 A <30 µs | 10 MHz | 200 mA/div | AC/DC/GND | 20 mm | Probus, 1MΩ only | |
500 A | 700 A | 2 MHz | 200 mA/div | AC/DC/GND | 20 mm | Probus, 1MΩ only |
Additional Information
Cable Length | 1.5 m |
Weight | 240 g |
Max. Conductor | 5 mm |
Size (diameter) | ProBus, 1 MΩ only† |
† Requires AP-1M for use with 50 Ω input only oscilloscopes.
※ 자세한 사항은 'DataSheet'나 'Quick Start Guide'를 참조해 주세요.
상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?
상품이 찜 리스트에 담겼습니다.
바로 확인하시겠습니까?
