N2791A 25-MHz의 저렴한 고전압 차동 프로브를 사용하여 오실로스코프와 함께 안전하고 정확한 플로팅형 측정을 하십시오. N2791A 차동 프로브를 사용하면 기존의 접지된 키사이트 오실로스코프를 최대 700 V 차동 전압 및 공통 모드 전압의 플로팅형 신호 측정에 사용할 수 있습니다.
이 프로브는 1 MΩ BNC 입력이 있는 오실로스코프와는 모두 호환됩니다. 이 프로브는 포함된 4x AA 배터리에 의해 전원을 공급받거나, 또는 공급된 USB 전원 케이블을 통해 스코프나 PC의 USB 호스트 포트에서 전원을 공급받습니다.
Key Features
• 25 MHz 대역폭
• 10:1 또는 100:1의 사용자 선택 가능한 감쇠 설정
• 100:1 모드에서 최대 ±700 V의 차동 및 공통 모드 전압 정격 측정
• 포함된 4x AA 배터리 또는 스코프나 PC의 USB 호스트 포트에 의해 전원 공급
Compatibility with Oscilloscope
• 1 MΩ BNC 입력이 있는 오실로스코프와는 모두 호환 가능
Spec Comparison
| N2790A | N2791A | N2891A |
Bandwidth (—3 dB) | ≥ 100 MHz probe bandwidth1 | ≥ 25 MHz probe bandwidth | ≥ 70 MHz |
Rise time (calculated) | ≤ 3.5 ns | ≤ 14 ns | ≤ 5 nsec |
Attenuation | 50:1/500:1 | 10:1/100:1 | 100:1/1000:1 |
Gain accuracy (% of reading) | ± 2% at 20 to 30 ºC ± 4% at 0 to 20 ºC and 30 to 50 ºC1 | ||
DC CMRR | –70 dB at 500 VDC | ||
AC CMRR | –80 dB at 50/60 Hz –50 dB at 1 kHz –50 dB at 1 kHz | –80 dB at 50/60 Hz –40 dB at 1MHz | –80 dB at 50/60 Hz –60 dB at 20 kHz |
Propagation delay | 14 nsec at 50:1 2.8 nsec at 500:1 | ||
Input R//C (each input to ground) | 4 Mohm // 7 pF | 4 Mohm // 10 pF | 50 Mohm // 7 pF |
Input R//C (between inputs) | 8 Mohm // 3.5 pF | 8 Mohm // 8 pF | 100 Mohm //5 pF |
Max differential operating voltage (DC+PeakAC or RMS) | ± 1400 V at 500:1 ± 140 V at 50:1 | ± 700 V at 100:1 ± 70 V at 10:1 | ± 7000 V or 5000 Vrms at 1000:1 ± 700 V or 700 Vrms at 100:1 |
Max common mode operating voltage (DC+PeakAC or RMS) | ± 1000 V (CAT II) ± 600 V (CAT III) | ± 700 V at 100:1 ± 700 V at 10:1 | ± 7000 V or 5000 Vrms at 1000:1 ± 7000 V or 5000 Vrms at 100:1 |
Max nondestructive voltage | ± 1500 VDC + Peak AC differential mode ± 1300 Vrms (CAT II) common mode | ± 1000 Vrms (CAT II) differential and common mode | ± 7000 V (DC + Peak AC) ± 5000 Vrms at 1000:1 and 100:1 in differential and common mode (Main Isolated) |
Output maximum voltage range | ± 2.8 V into 1 Mohm (500:1) | 7 V into 1 Mohm (100:1) | 7 V into 1 Mohm (1000:1) |
Scope’s input impedance | 1 Mohm AutoProbe interface | 1 Mohm BNC interface | 1 Mohm BNC interface |
Output offset | Adjustable | ± 7.5 mV (typical) | ± 5 mV (typical) |
Noise referenced to input | < 300 mVrms at 500:1 < 50 mVrms at 50:1 | ||
Temperature - operating | –10 to 50 ºC | –10 to 40 ºC | –10 to 40 ºC |
Temperature - non-operating | –51 to 71 ºC | –30 to 71 ºC | –30 to 71 ºC |
Humidity - operating | 80% RH at 40 ºC | 25 to 85% RH | 25 to 85% RH |
Humidity - non-operating | 90% RH at 65 ºC | 25 to 85% RH | 25 to 85% RH |
Operating altitude | 2,000 m | 3,000 m | 3,000 m |
Nonoperating altitude | 15,300 m | 15,300 m | 15,300 m |
Vibration | Keysight class GP and MIL-PRF 28800F class 3 random | ||
Shock | Tip end: 400g 1/2 sine wave AutoProbe BNC End: 50g 1/2 sine Bwave Probe circuit box: Keysight class B1 and MIL-PRF-28800F class 3 | ||
Safety specifications | IEC61010-031 | IEC61010-031 | IEC61010-031 |
1. Denotes warranted specification after 20 minute warm-up, all others are typical.
Ordering Information
Warranty
• 1 YR
Contents
:: N2791A Differential probe- 25 MHz High-voltage ::
• 리트랙터블 후크 팁 x 2
• 악어 클립 x 2
※ 자세한 사항은 'DataSheet'나 'Quick Start Guide'를 참조해 주세요.
상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?
상품이 찜 리스트에 담겼습니다.
바로 확인하시겠습니까?